Tag Archives: VVDI

VVDI2 BMW FEM/BDC Coding/Programming Manual

vvdi2-key-programmer-1-600x264

FYI: BMW FEM/BDC Coding/Programming with VVDI2 full kit 4.3.0 .vvdi2-bmw-fem-programming-2

step 1:

read FEM/BDC coding via OBDII or on the bench
you’d better not close this window after starting this procedure
step 2:

open FEM/BDC shell, find out where the 95128/95256 chip is, read EEPROM dump via BDM programmer
load original EEPROM dump and save special EEPROM dump, write special EEPROM dump back to the 95128/95256 chip
restore FEM/BDC shell, provide -12v and connect it via OBD
step 3:

this operation requires connecting FEM/BDC on the bench, and make sure you finish step 1 ans step 2
provide +12v to FEM.BDC and connect it via OBD
step 4:

open FEM/BDC shell, write original EEPROM dump (read step 2) back to the 95128/95256 chip
restore FEM/BDC shell and connect it via OBD
step 5:

loading coding file (read step 1), write to FEM/BDC via OBDII, finish FEM/BDC programming

Attention please!!!

– You can directly backup/restore coding

– You have to pre-setup the FEM/BDC module before deleting/adding keys or resetting keys

– You’ll be told other tools need to be used first to program the FEM/BDC system, then setup FEM/BDC via VVDI2. It happens when you do FEM/BDC key learning, and you don’t have a working software version

– You’d better not close the VVDI2 interface when you pre-setup FEM/BDC

– You need do with 95128(FEM) or 95256(BDC) chip when pre-setup FEM/BDC

Note: there are two 8-pin chips; do not disassemble the wrong chip; better refer to the wiring diagram

– You must restore original EEPROM data, restore coding when pre-setup FEM/BDC. If you fail to restore coding or the remote cannot start or something wrong with the window (or other failures probably) after coding restore and FEM/BDC installation, please use other tools to do re-coding FEM/BDC

– Ask tech support @eobdtool.fr for help, if the replay sounds continuously after supplying power to the FEM/BDC. Usually, it needs programming.

VVDI PROG Programmer Software V4.4.3

VVDI PROG Programmer
Support VAG EDC17 and BMW ECU
Support software update online
Latest version: V4.4.3
Support English/Chinese languages.

7 Highlights to get the VVDI PROG:

1) The built-in update software allows user to update VVDIProg firmware timely.
2) High-speed USB communication interface enable the software automatically connect.
3) Smart operation mode: the possible causes of error will be listed
4) Reserve ports: for future update.
5) The self-test function enable you check if the machine works well.
6) Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
7) Software version: V4.4.3 Firmware Version: V1.2.2

For new update version V4.4.3, if want new software,pls click following link

https://mega.nz/#!XZ4DCYQS!8Bqdg9XXeBaRf8IbBuvQTxGaYIuyngz4DENZDXJdDEo

VVDI PROG Programmer is now update to V4.4.0

VVDI PROG Programmer
Support VAG EDC17 and BMW ECU
Support software update online
Latest version: V4.4.0
Support English/Chinese languages.

And it is now update to V4.4.0

VVDIProg4.4.0.zip v4.4.0 (2016-03-07)

* This version DON’t need update
firmware
* Add the Download Link in Upgrade
option, click it and get the last
version software!!!
* Change the diagram interface
+ Add MC9S12C32_SECURED,
MC9S12C64_SECURED,
MC9S12C96_SECURED,
MC9S12C128_SECURED
in <2-MCU>-><MOTOROLA>
Mask:(0M66G,1M34C,1L45J,2L45J)
+ Add EIZ-W164(ST12),
EIZ-W215(ST12),
EIZ-W221(ST12),
EIZ-VANEO(ST12) options
in <4-IMMOBILIZER>-><BENZ>
+ Add CAPTIVA(2011) option in
<5-DASHBORAD>-><CHEVROLET>
+ Add BAOJUN330 option in
<5-DASHBORAD>-><SAICMOTOR>
+ Add C70(2011) option in
<5-DASHBORAD>-><VOLVO>

VVDI Pro Key Programmer Software Download

Xhorse VVDI Benz VVDI MB TOOL Benz V2.0.7 Updated!

Xhorse VVDI Benz VVDI MB TOOL Benz V2.0.7 Updated!

This Benz V2.0.7 software of the Xhorse VVDI MB TOOL requires firmware V2.0.7.

2016-02-26 VVDI MB Tool Newest Update
===== BENZ V2.0.7 =====
1. Attention: All user update device to firmware v2.0.7, software v2.0.7, the lower version dont support password calculation
2. User manual v1.2 released, overview v1.3 released
3. Add support for renew ECU/Gearbox/ISM etc
4. Fix diable key in K-Line protocol
5. Fix clear TP in K-Line protocol
6. Fix read key bug in password calculation
7. Bugfix

Learn how to update the VVDI MB TOOL: http://www.eobdtool.fr/upload/pro/201512/xhorse-vvdi-benz-vvdi-mb-tool-key-programming-user-manual.pdf.

VVDI Prog Programmer V4.3.1 Updated On EOBDTOOL.FR

VVDI Prog Programmer V4.3.1 Updated(2016-01-27)

* This version DON’t need update
firmware
+ Add MC9S12GN16_UNSECURED,
MC9S12GNA16_UNSECURED,
MC9S12GN32_UNSECURED,
MC9S12GNA32_UNSECURED,
MC9S12G48_UNSECURED,
MC9S12GA48_UNSECURED,
MC9S12GN48_UNSECURED,
MC9S12G64_UNSECURED,
MC9S12GA64_UNSECURED,
MC9S12G96_UNSECURED,
MC9S12GA96_UNSECURED,
MC9S12G128_UNSECURED,
MC9S12GA128_UNSECURED,
MC9S12G192_UNSECURED,
MC9S12GA192_UNSECURED,
MC9S12G240_UNSECURED,
MC9S12GA240_UNSECURED options
Mask:(0N95B,0N51A,0N75C,1N75C,
0N48A,1N48A)
MC9S12HA32_UNSECURED,
MC9S12HA48_UNSECURED,
MC9S12HA64_UNSECURED,
MC9S12HY32_UNSECURED,
MC9S12HY48_UNSECURED,
MC9S12HY64_UNSECURED options
Mask:(0M34S)
MC9S12P32_UNSECURED,
MC9S12P64_UNSECURED,
MC9S12P96_UNSECURED,
MC9S12P128_UNSECURED options
Mask:(0M01N)
MC9S12XEA128_UNSECURED,
MC9S12XEG128_UNSECURED,
MC9S12XEA128_SECURED,
MC9S12XEG128_SECURED options
Mask:(1M53J,2M53J,0N36H,1N36H)
MC9S12XHY128_UNSECURED,
MC9S12XHY256_UNSECURED options
Mask:(0M23Y)
MC9S12XS64_UNSECURED,
MC9S12XS128_UNSECURED,
MC9S12XS256_UNSECURED options
Mask:(0M04M,1M04M,0M05M)
in <2-MCU>-><MOTOROLA>
+ Add MC9S12XE_UNLOCK option
in <2-MCU>-><MOTOROLA>
(Backup all data before use it)
+ Add ME20U2-XET256-BACKUP,
ME20U2-XET512-BACKUP,
MT22-XEP768-BACKUP,
MT60-XEP768-BACKUP options
in <3-ECU>-><DELPHI>
+ Add the 12V power adaptor status
in information dialog

VVDI Proghttp://www.eobdtool.fr/wholesale/vvdi-prog-programmer.html

VVDI MB TOOL latest version V2.0.6 Update (2016-01-16)

VVDI MB TOOL latest version V2.0.6 Update (2016-01-16)

Require firmware version to be V2.0.6.

BENZ V2.0.6
1. Attention: All user update VVDI MB TOOL device to firmware v2.0.6, software v2.0.6, the lower version dont support password calculation
2. User manual v1.1 released, overview v1.2 released
3. Add support for disable key
4. Fix bug for test W164, W221 EIS status
5. Fix bug for write EIS data
6. Bugfix

Tips for VVDI2 Commander Key Programmer Full Version

Tips for VVDI2 Commander Key Programmer Full Version

VVDI 2 includes all the VVDI functions, the function of Tango. And this one is the newest hotsellers of the Xhorse company. When the software showed that “Remaining Synchronization Time:1 days”. You just need to ingnore this. Because it does not affect the usage of the VVDI2 Commander Key Programmer functions.

xhorse-vvdi2

2015 VVDI2 Commander Key Programmer Full Customer Feedback

2015 VVDI2 Commander Key Programmer Full Customer Feedback

Q: I do have BMW X5 from 2013+ , it’s F15 with CAS4+ I guess and 5M48H, it has all keys lost. What equipment I should buy from you to make a new key?
A: 1) For 5M48H, you need to use XPROG or VVDI pro to read the data.
2) Use BMW MULTI TOOL or VVDI 2 do CAS4+, and use the data you read out to generate the key data to match programming and simultaneous car
For second steps. If you choose BMW MULTI TOOL, you still need to buy the CAS4 adapter. If you choose VVDI2, then no need to buy others.

Q: I want to open component security function. what should i do?
A: For this function. If you want to use, you need to open pin,mac reading,CS authorization then can use. If you have bought the condor key cutting machine. Then this authorization is free to open. Please give us your name/country/EmailVVDI SN/ VVDI2 SN / CONDOR SN. If you do not bought CONDOR key cutting machine, then cannot open this authorization.

Q: Hello. I purchased this product and it says at the top… re synchronization in 23 days.. How do you re synchronization the device…Thank you.
A: This is normal. Once the day become 1, you just need to connect internet. Then it will be back to 30 days again. This is setted by Xhorse company to avoid others crack their software.

Xhorse VVDI Benz VVDI MB TOOL Key Programmer Latest Version V2.0.5 Updated!

Xhorse VVDI Benz VVDI MB TOOL Key Programmer Latest Version V2.0.5 Updated!

Xhorse VVDI Benz VVDI MB TOOL Key Programmer updated from V2.0.3 to V2.0.5. This is the new update information.

1. Add password calculation for lost all key. Support W166, W246, W212, W212(old). After success find password, it will need pay 2 calculation times
2. Password calculation with working key support: add working key test before data acquisition
3. Add EIS status test, working key test function
4. Fix bug for OBD read W203, W639, W463(K) EIS
5. Autodetect W212 EIS with ELV
6. Fix bug for read v51 key password via NEC adaptor
7. Add IR repair key function
8. Bugfix

Attention: All user update device to firmware v2.0.5, software v2.0.5, the lower version don’t support password calculation

About how to update, please learn from: http://blog.eobdtool.fr/how-to-update-firmware-of-the-original-xhorse-vvdi-benz-vvdi-mb-tool-key-programmer/.

How to use PCF79XX Adapter to read write PCF79XX chip?

How to use PCF79XX Adapter to read write PCF79XX chip?

First, why to read write PCF79XX chip?
1. Currently PCF79XX chip support lock, unlock and read/write data.
2. RENEW function will be added in the coming days, it will load corresponding data and directly renew key, the detailed specific
car model data will be released.

How to read write PCF79XX chip?
Way1: Remove the chip and put it in the IC socket, select option “PCF79XX chip” shown as follows.

pcf79xx-chip-read-1
Way2: Connect wire to the circuit board, select option “PCF79XX adapter” shown as follows.

pcf79xx-chip-read-2

Note: If PCF79XX adapter option can’t recognize chip due to the affection of circuit board, just remove chip and put it in IC
socket, then use option “PCF79XX chip” to operate.