Tag Archives: vvdi prog

VVDI PROG dernière version du logiciel V4.6.7 mise à jour

VVDI PROG dernière version du logiciel V4.6.7 mise à jour

V4.6.7 (2018-01-27)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.7 version in Doc folder
* ESW3 change Read/Write mode
+ Add 25LC010, 25LC020, 25LC040, 25LC080, 25LC160, 25LC320, 25LC640, 25LC128, 25LC256, 25LC512 options in <1-EEPROM&FLASH>-><MICROCHIP>
+ Add TC97010(CLIP) option in <1-EEPROM&FLASH>-><TOSHIBA(CLIP)>
+ Add MB91F060, MB91F062, MB91F067, MB91F575, MB91F577, MB91F578C, MB91F579C, MB91F591B, MB91F592B, MB91F594B, MB91F596B, MB91F597B,
MB91F599B, MB91F59AC, MB91F59BC options in <2-MCU>-><FYJITSU-MB91F>
+ Add MC68HC05E6 option in <2-MCU>-><MOTOROLA-MC68HC(7)05>
+ Add W203(AM29F400BB) option in <3-ECU>-><BENZ>
+ Add ME7 option in <3-ECU>-><BOSCH>
+ Add IAW 4AC.A4 option in <3-ECU>-><MAGNETI-MARELLI>
+ Add EIS-W203-1J35D(ADAPTER), EIS-W203-1J74Y(ADAPTER), EIS-W203-2J74Y(ADAPTER), EIS-W203-3J74Y(ADAPTER), EIS-W203-4J74Y(ADAPTER),
EIZ-W209-HC12(ADAPTER), EIZ-W211-HC12(ADAPTER), EIZ-W209-ST12(ADAPTER), EIZ-W211-ST12(ADAPTER), EIZ-W215-ST12(ADAPTER), EIZ-W220-ST12(ADAPTER),
EIZ-W230-ST12(ADAPTER), EIZ-W164-ST12(ADAPTER), EIZ-W169-V1-ST12(ADAPTER), EIZ_VITO_ST12(ADAPTER), EIZ_SPRINGTER(ADAPTER), EIS-W639-0L02M(ADAPTER),
EIS-W639-1L02M(ADAPTER), EIS-W639-3K85K(ADAPTER), EIS-W639-1J35D(ADAPTER), EIS-W639-4J74Y(ADAPTER), HC05E6_REMOTE(0F82B) options in <4-IMMOBILIZER>-><BENZ>
+ Add EWS3—KLINE(0D46J)_READ, EWS3—KLINE(0D46J)_WRITE options in <4-IMMOBILIZER>-><BMW>
+ Add EPICA_BCM(–2009), SAIL_IMMOBOX(–2009) option in <4-IMMOBILIZER>-><CHEVROLET> (Support read PASSWORD)
+ Add IX35(2015)(MC9S12XD256) option in <4-IMMOBILIZER>-><HYUNDAI>
+ Add OPEL_IMMOBOX(–2009) option in <4-IMMOBILIZER>-><OPEL> (Support read PASSWORD)
+ Add JETTA_IMMOBOX(–2008) option in <4-IMMOBILIZER>-><VOLKSWAGEN> (Support read PASSWORD)
+ LINGZHI_M5(2016)(MC9S12HY64) option in <5-DASHBOARD>-><DONGFENG>
+ LAVIDA_DASHBOARD(D79F3422) option in <5-DASHBOARD>-><VOLKSWAGEN>
+ VERNA(D70F3421) option in <5-DASHBOARD>-><HYUNDAI>
+ TIGGO5(MB91F594BS) option in <5-DASHBOARD>-><CHERY>
+ PRIDE option in <7-AIRBAG>-><OTHERS>

Software Download Link
https://mega.nz/#!6pZDxYza!JtyvGWXT5dhU2hVsZ9kNEjPqZaIY6Q0SfNkQO6MM4KA
password:123456

VVDI PROG dernière version du logiciel V4.6.6 mise à jour

VVDI PROG dernière version du logiciel V4.6.6 mise à jour

VVDI PROG latest software version V4.6.6 update

————————————-
v4.6.6 (2017-12-31)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.6 version in Doc folder
* Fix MC9S12XS series write error problem
* Fix EWS3 ADAPTER R&W error problem
* Fix SPC56AP series write error problem
* Fix D70F3356 write error problem
* Upgrade MB91F061 option, support R&W PFLASH
+ Add TMS370C002A, TMS370C010A, TMS370C012A, (Need TMS370(PLCC28) ADPATER) TMS370C020A, TMS370C022A, TMS370C032A, TMS370C040A,
TMS370C042A, (Need TMS370(PLCC44) ADPATER) TMS370C050A, TMS370C052A, TMS370C056A, TMS370C058A,TMS370C256A (Need TMS370(PLCC68) ADPATER)
options in <2-MCU>->
+ SENOVA-D50-BCM option in <4-IMMOBILIZER>->
+ Add REGAL-KG-MODULE(2014) option in <4-IMMOBILIZER>->
+ Add MEGANE-UCH option in <4-IMMOBILIZER>->
+ Add MG-GT-DASHBOARD(2014) option in <5-DASHBORAD>->
+ Add PTS-W221, TRCM-W221 options in <8-OTHER>->
+ Add X5-LCM option in <8-OTHER>->
Here is the software download link 
https://mega.nz/#!LxZlybIT!qRs5x3aH2UxpYET-4bqPrr-tK6SZj7om0WwXaEFdOow
password:123456

Programmeur VVDI PROG mis à jour vers V4.6.5

Programmeur VVDI PROG mis à jour vers V4.6.5

V4.6.5 (2017-11-27)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.5 version in Doc folder
+ Update V850 D-Flash format conversion tool, support insert with original 64KB file
* Fix EEPROM CLIP ADAPTER R&W some chips error problem
* Fix EWS3 ADAPTER sometimes insertion check error problem
* Fix 35080/D80 ADAPTER erase some 35080VP first 32 Bytesfailed problem
+ Add MC68HC05B32(0D60J), MC68HC05B32(3G96A), MC68HC705B16(1K20C) options in <2-MCU>-><motorola-mc68hc(7)05> (Need MC68HC05BX ADAPTER)
+ Add MC68HC05X32(0D69J), MC68HC05X32(1D69J), MC68HC05X32(1H52A), MC68HC705X32(0G47V) options in <2-MCU>-><motorola-mc68hc(7)05> (Need MC68HC05X32 ADAPTER)
+ Add MC68HC05E6(0F82B) option in <2-MCU>-><motorola-mc68hc(7)05>
+ Add EMS6104(AM29F400BB), SIMTEC76(29F400BB) options in <3-ECU>->
+ Add SIMOS9.4(AM29F400BB) option in <3-ECU>->
+ Add IRAN(2014-2017)(29F400BB) option in <3-ECU>->
+ Add BJ40-BCM(2016), E150-BCM, HUANSU-S3-BCM options in <4-IMMOBILIZER>->
+ Add SPRINTER-IMMOBOX(2002-2005) option in <4-IMMOBILIZER>->
+ Add BESTURN-B70-BCM(MC9S12XEG128) option in <4-IMMOBILIZER>->
+ Add BSI option in <4-IMMOBILIZER>->
+ Add ELANTRA-KG-MODULE(MC9S12XEG384) option in <4-IMMOBILIZER>->
+ Add IMMOBOX(STM8AF6288) option in <4-IMMOBILIZER>->
+ Add EXCELLEGT(D70F3423) option in <5-DASHBORAD>->
+ Add ARRIZO7-DASHBOARD(2015)option in <5-DASHBORAD>->
+ Add K50-DASHBOARD(2015) option in <5-DASHBORAD>->
+ Add REGAL-SRS(MC9S12XEG384) option in <7-ARIBAG>->
+ Add ASTRA-SRS option in <7-ARIBAG>->
+ Add SRS-VW61 option in <7-ARIBAG>->
+ Add ISM(ST10F269), S-CLASS-W221-FRONT-SAM options in <8-OTHER>->
+ Add SORENTO-IPM option in <8-OTHER>->
+ Add PASSAT-PDC-MODULE, REAR-VIEW-CAMERA(D70F3356), TIGUAN-KG-MODULE(MC9S12XET256) option in <8-OTHER>->

Software Download Link 

https://mega.nz/#!DpJRGZJC!3jrjbFDLpiOB-IgO5wCna8Nzt6A3twmh9oJgMMmc6U8
password:123456

VVDI PROG Latest Software Version V4.6.3 Update

Xhorse VVDI Prog Software Released on 18th Oct

VVDI PROG latest software version V4.6.3 update
V4.6.3 (2017-10-17)

* This version DON’t need update firmware
* Fix some bugs
* Fix MC68HC(9)08 series problem
+ Add AM29F200BB-xxE, AM29F200BB-xxF, AM29F200BB-xxS, AM29F200BT-xxE, AM29F200BT-xxF, AM29F200BT-xxS, AM29F400BB-xxE,AM29F400BB-xxF, AM29F400BB-xxS,
AM29F400BT-xxE, AM29F400BT-xxF, AM29F400BT-xxS, AM29F800BB-xxE, AM29F800BB-xxF, AM29F800BB-xxS, AM29F800BT-xxE, AM29F800BT-xxF, AM29F800BT-xxS, AM29F160BBxxE,
AM29F160BBxxF, AM29F160BTxxE,AM29F160BTxxF options in <1-EEPROM&FLASH>-> (Need AM29FXXXB ADAPTER)
+ Add M95M01, M95M02 options in <1-EEPROM&FLASH>->
+ Add M95M01(CLIP), M95M02(CLIP) options in <1-EEPROM&FLASH>-><st(clip)> (Need EEPROM CLIP ADAPTER)
+ Add RFA-UNSECURED(MC9S12XET256), RFA-SECURED(MC9S12XET256) options in <8-OTHER>->
This is the software download link
https://mega.nz/#!3thBiTrT!s6X6w0dLo3iKbvZ5eOi1BkB6Smlc0xhjWaec5XR5I1k

 

VVDI PROG Upgrade Information

VVDI PROG Upgrade Information

VVDI PROG Newest version  V4.5.9

v4.5.9 (2017-06-28)

* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.9 version in Doc folder
* Update polish language
+ Update V850 D-Flash format conversion tool
* Fix STM8 series options error
* Fix MED17.1 option error
* Fix V850E-DG3 diagram error
* Fix ME17.9.11.1 diagram error
* Fix BAOJUN630 diagram error
+ Add MPC5606B, MPC5607B, MPC5602D, MPC5606E, MPC5601P, MPC5602S, MPC5604S options
in <2-MCU>->
+ Add SPC560B50B2, SPC560B64L3, SPC560C40L1, SPC560C50L1, SPC56AP54L3, SPC56AP54L5,
SPC56AP60L3, SPC56AP60L5 options in <2-MCU>->
+ Add MT60(TC1766) option in <3-ECU>->
+ Add V3 diagram in <3-ECU>->-><mt80(tc1766)>
+ Add KESSY(2008–) option in <4-IMMOBILIZER>->
(Need to use with VVDI2,support Touareg, Bentley, A8, Cayenne, Phaeton with kessy module (IMMO4 system) after 2008)
+ Add XC60-REVIEW-MIRROR option in <4-IMMOBILIZER>->
+ Add SENOVA-D70 option in <5-DASHBORAD>->
+ Add EXCELLEGT option in <5-DASHBORAD>->
+ Add AVEO option in <5-DASHBORAD>->
+ Add FIESTA option in <5-DASHBORAD>->
+ Add K5(2017) option in <5-DASHBORAD>->
+ Add FREELANDER(2004) option in <5-DASHBORAD>->
+ Add MG3(2016) option in <5-DASHBORAD>->
+ Add EXCELLEGT-SRS option in <7-ARIBAG>->
+ Add ALSVIN-SRS option in <7-ARIBAG>->
+ Add CITY-SRS(MPC5604P) option in <7-ARIBAG>->
+ Add 2008-SRS option in <7-ARIBAG>->
+ Add SRS-VW20LE(SPC560P50L3) option in <7-ARIBAG>->
+ Add A4L-LWR-MODULE(2010), A6L-C6-AMP, A8L-AMB-MODULE(2011), ESL-HC08GR16-V2 options in <8-OTHER>->
+ Add 528-SEAT-MODULE option in <8-OTHER>->

Le logiciel VVDI PROG Programmer est maintenant mis à jour vers V4.5.7

Le logiciel VVDI PROG Programmer est maintenant mis à jour vers V4.5.7

VVDI Prog V4.5.7 Update Plan

VVDI Prog v4.5.7 (2017-04-21)

* This version DON’t need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.7
version in Doc folder
* Fix some MC68HC(9)08 read error
problem
* Fix PIC12F(16F) diagram error
problem
+ Add TC1762-CAN,
TC1766-CAN options
in <2-MCU>->
+ Add STM8AF5179,
STM8AF5268, STM8AF5269, STM8AF5286, STM8AF5288, STM8AF5289, STM8AF528A, STM8AF52A6, STM8AF52A8, STM8AF52A9, STM8AF52AA, STM8AF6168, STM8AF6213,
STM8AF6223, STM8AF6223A, STM8AF6246, STM8AF6248, STM8AF6266, STM8AF6268, STM8AF6269, STM8AF6286, STM8AF6288, STM8AF6289, STM8AF628A, STM8AF62A6,
STM8AF62A8, STM8AF62A9, STM8AF62AA, STM8AL3136, STM8AL3138, STM8AL3146, STM8AL3148, STM8AL3166, STM8AL3168, STM8AL3188, STM8AL3189, STM8AL318A,
STM8AL31E88, STM8AL31E89, STM8AL31E8A, STM8AL3LE88, STM8AL3LE89, STM8AL3LE8A, STM8AL3L46, STM8AL3L48, STM8AL3L66, STM8AL3L68, STM8AL3L88, STM8AL3L89,
STM8AL3L8A, STM8L051F3, STM8L052C6, STM8L052R8, STM8L101F1, STM8L101F2, STM8L101F3, STM8L101G2, STM8L101G3, STM8L101K3, STM8L151C2, STM8L151C3, STM8L151C4,
STM8L151C6, STM8L151C8, STM8L151F2, STM8L151F3, STM8L151G2, STM8L151G3, STM8L151G4, STM8L151G6, STM8L151K2, STM8L151K3, STM8L151K4, STM8L151K6, STM8L151M8,
STM8L151R6, STM8L151R8, STM8L152C4, STM8L152C6, STM8L152C8, STM8L152K4, STM8L152K6, STM8L152K8, STM8L152M8, STM8L152R6, STM8L152R8, STM8L162R8, STM8L162M8,
STM8S003F3, STM8S003K3, STM8S003C6, STM8S003K6, STM8S007C8, STM8S103F2, STM8S103F3, STM8S103K3, STM8L105C4, STM8L105C6, STM8L105K4, STM8L105K6, STM8L105S4,
STM8L105S6, STM8S207C6, STM8S207CB, STM8S207K6, STM8S207K8, STM8S207M8, STM8S207MB, STM8S207R6, STM8S207R8, STM8S207RB, STM8S207S6, STM8S207S8, STM8S208C6,
STM8S208C8, STM8S208MB, STM8S208R8, STM8S208RB, STM8S903F, STM8S903K options

in <2-MCU>->
+ Add ME17.9.11.1(TC1762) option
in <3-ECU>->
+ Add MED17.1(TC1766) option
in <3-ECU>->
+ Add EIS-W639(1J35D),
EIS-W639(3K85K),
EIS-W639(4J74Y) options
in <4-IMMOBILIZER>->
+ Add JIEFANG-J6-HCS300 option
in <4-IMMOBILIZER>->
* Change JIEFANG-J6-BCM option
(Support up to 5 remotes)
+ Add SENOVA-D60 option
in <5-DASHBORAD>->
+ Add EADO option
in <5-DASHBORAD>->
+ Add TRUMPCHI-GS4 option
in <5-DASHBORAD>->

Logiciel VVDI PROG Programmer mis à jour vers V4.5.6

VVDI PROG Programmer is now Updated to V4.5.6
Here is the update information and software download link
Newest version V4.5.6
This version DON’t need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.6
version in Doc folder
+ Support operate software while
opening the diagram
* Fix MC9S12G192,
MC9S12GA19,
MC9S12G240,
MC9S12GA240 options
PFLASH write error problem
+ Add PIC12F635,
PIC12F683 options
in <2-MCU>->
+ Add PIC16F631,
PIC16F636,
PIC16F639,
PIC16F677,
PIC16F684,
PIC16F685,
PIC16F687,
PIC16F688,
PIC16F689,
PIC16F690 options
in <2-MCU>->
+ Add JIEFANG-J6-BCM option
in <4-IMMOBILIZER>->
(Need to use with VVDI2)
+ Add FC-OPERATION-UNIT-W221
option in <8-OTHER>->

VVDI PROG est maintenant mis à jour V4.5.0

VVDI PROG est maintenant mis à jour V4.5.0

V4.5.0 (2016-09-26)

* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.0 version in Doc folder
* Fix ATMEGAxx8 diagram error problem
* Change D70f3624 diagram(add QFP64 package)
+ Add ATMEGA48P,ATMEGA48PB, ATMEGA88P,ATMEGA88PB, ATMEGA163,ATMEGA164,
ATMEGA164P, ATMEGA168P,ATMEGA168PB, ATMEGA169P,ATMEGA323,ATMEGA324, ATMEGA324P,
ATMEGA324PB, ATMEGA325, ATMEGA325P, ATMEGA3250, ATMEGA3250P, ATMEGA328, ATMEGA328P,
ATMEGA328PB, ATMEGA329, ATMEGA329P,ATMEGA3290, ATMEGA3290P,ATMEGA644, ATMEGA644P,
ATMEGA645, ATMEGA645P, ATMEGA6450, ATMEGA6450P, ATMEGA649, ATMEGA649P, ATMEGA6490,
ATMEGA6490P, ATMEGA103, ATMEGA1284, ATMEGA1284P optionsin <2-MCU>->
+ Add HC908GZ8,HC908GZ16, HC908GZ32,HC908GZ48,HC908GZ60,HC908GZ8_SECURED,HC9 08GZ16_SECURED,
HC908GZ32_SECURED,HC908GZ48_SECURED,HC908GZ60_SECU RED options in <2-MCU>-><motorola-mc68hc(9)08>
+ Add MC912DT128_UNSECURED,MC912DT128A_UNSECURED,MC912DT 128P_UNSECURED,MC912DT128_SECURED,
MC912DT128A_SECURED,MC912DT128P_SECURED optionsin <2-MCU>-><motorola-mc68hc(9)12>
+ Add MT20U2-MC912DT128P option in <3-ECU>->
+ Add BESTURN-B90-BCM option in <4-IMMOBILIZER>->
+ Add FENGGUANG(2016) option in <5-DASHBORAD>->
+ Add XC60-HIGH-EQUIPPED(2014) option in <5-DASHBORAD>-
Free Software Download
https://mega.nz/#!Pp4HxLxS!vZ8jiHhSgU1zOdBgLOgEzE6xBSK4gjcPpVe4oeybhG0
password:123456

VVDI PROG is newly Update to V4.4.8

Original VVDI PROG is update from V4.4.6 to V4.4.8

With every update, it will be added some new update information

With the new update, there are some bugs will be fixed

New Update Informations for V4.4.8

VVDI PROG V4.4.8 Update Information             (2016-08-01)
* This version DON’t need update
  firmware
* Fix some bugs
  (write or erase operation prompt
  device error problem)
For more informations,pls visit the following link
http://www.eobdtool.fr/wholesale/vvdi-prog-programmer.html

VVDI PROG Programmer Software V4.4.3

VVDI PROG Programmer
Support VAG EDC17 and BMW ECU
Support software update online
Latest version: V4.4.3
Support English/Chinese languages.

7 Highlights to get the VVDI PROG:

1) The built-in update software allows user to update VVDIProg firmware timely.
2) High-speed USB communication interface enable the software automatically connect.
3) Smart operation mode: the possible causes of error will be listed
4) Reserve ports: for future update.
5) The self-test function enable you check if the machine works well.
6) Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
7) Software version: V4.4.3 Firmware Version: V1.2.2

For new update version V4.4.3, if want new software,pls click following link

https://mega.nz/#!XZ4DCYQS!8Bqdg9XXeBaRf8IbBuvQTxGaYIuyngz4DENZDXJdDEo