OBDSTAR Registration and Software Update Procedure
Click ”Sign up” to fill in user information, Username can be English characters or the combination of alphabet and numbers.
Serial number and register password can be referred to System information in the device.( Figure 1.4.3）
For distributor code, please refer to your distributor for more details.
Operation steps as following:
Step 1: Remove the TF card from your device. Insert your TF card into computer.
Step 2：Open update tool and login.
Step 3: Click the source menu, choose the software you want to update, click it and confirm.
Step 4: Click and select all the software then click “update”. (Note: It is better to click “Format memory car” during updating.)
Step 5: Wait for several minutes then the updating finished.
Note：For new update software and questions during updating,
please contact your distributor.
How to update software for OBDSTAR H Series Device ?
Update tool software installation
Login our website:http://en.obdstar.com and click “One Key Upgrade”.
Download the update tool and diagnostic software, double click, then go to the next step:
Step 1：Click “Next”
Step 2: Click “Next”
Step 3: Wait for several minutes then the installation finished
Step 4: Click “Finish”
After Update Tool installation completed, click the Update Tool software icon
on desktop to start the update tools. The main interface is as shown below:
We have a customer who bought an Ford VCM II to do his Ford Models.
During using,there is a problem occured
Here is the message he sent to me.
Hello I bought the ford VCM2 IDS module from you. I wanted to enable the license, but this gave me ‘expired’, so I can’t do anything with it.
In the readme file it says as follows:
If you need to install the IDS to the physical machine, just 2 steps:
Install IDS software.
Install VX Driver VCMII 2.2.0.xxxx.exe
Note: Ford IDS 86 do not need license and can be freely install.
Note: Mazda IDS any version do not need license and can be freely install.
Note: Ford IDS and Mazda IDS can not install in one PC.
What have I done wrong?
I think there’s a bug in the software. When you open, you get these images:
I think the big problem is that the VCM module isn’t recognized by IDS, The VX manager shows connexion, but no possibility to connect in IDS.
does the vcm module has to be connected to the car for the ids program to regognize the vcm module?
For this kind of issue, the solution is “close the VM manager and change the computer time to Beijing Time East Eight District.
It is easy to operate